is it possible these are the PN? (from a previous post)
Heat Shield part numbers:
There's two, an upper 895 804 161 (sits below turbo on inner wing) and a lower further down which part covers the chassis rail.
Lower one if needed is 895 804 162.
Heat Shield?
Collapse
X
-
There are part numbers for the shields for the transmission tunnel and exhaust but nothing that I can find for that - it references a drawing that I can't find
Leave a comment:
-
Thanks Andy.
Just to check these are for the two heat shields that run in line with each other between the turbo/downpipe/exhaust manifold and the cold air intake pipe by the cam cover?
Next question (for full marks
) ; what are the part numbers for the heat shield fore and aft below protecting the chassis from the turbo and downpipe?
Leave a comment:
-
-
I'm not selling anything Grega
My part is not a replacement but an additional part
Leave a comment:
-
i bought new one from vag last year. do you need this part

but it was way expenciver as one Rusty is sellingLeave a comment:
-
Follow that thread and you'll be amazed at the difference... and all for £20!Leave a comment:
-
-
I made a further shield that attaches to the 2 M8 bolts and then goes over the turbo, easy to makes and does a great job of keeping things cooler under there
I have a template somewhere that I can measure up - I just used some 1.5mm thk aluminium sheet off ebay. This was all part of my cone filter installation projekt.
Leave a comment:
-
Heat Shield?
I was thinking of replacing the heat shield that sits between the long black intake pipe and the turbo area as it's looking a bit tatty. Anyone know the part numbers?
Muchos graciasTags: None
Leave a comment: