Cross-sectioned 20VT head

[UrS4boy]

This might be a repost but if not, check this out:

http://forum.vwaudi-club.no/showthread.php?t=200221

Teaser (courtesy of Marc S. from EFI express):

[UrS4boy]

Head Games

Name these "parts" (features, functions):

[terrybullwon]

1. In take lifter hole
2. Oil
3. Water
4. Exhaust valve guide
5. Exhaust Chamber
6. Exhaust valve seat
7. Intake seat
8. Water way
9. Intake valve guide
10. In take chamber
11. Oil
12. In take lifter hole

[Dan]

Bonus points if you can put it back together and have it work again

[UrS4boy]

1. In take lifter hole 2. Oil 3. Water 4. Exhaust valve guide 5. Exhaust Chamber 6. Exhaust valve seat 7. Intake seat 8. Water way 9. Intake valve guide 10. In take chamber 11. Oil 12. In take lifter hole

11 out of 12. (You have No. 1 and 12 both as intake lifter holes). Also I would call the "chambers" ports, as in intake port and exhaust port.

Now we can see why the intake valve gets a "Glasgow kiss" by the piston when the timing belt breaks.

[Keeper of The Kitten]

1. Exhaust lifter bore

[UrS4boy]

1. Exhaust lifter bore

Ding.

[terrybullwon]

Sorry that's just me being a dyslexic ****

[UrS4boy]

Sorry that's just me being a dyslexic ****

You nee to pray to Dog more.

Actually I might have tricked you (not intentionally) since the labeled photo is from a different (and flipped) section from the first photo.

[Keeper of The Kitten]

I'm not claiming any kind of victory as James did all the hard work