one stop shop for rebuild parts?

[turbodriver63]

Just wondering is there a company who could supply me with all the parts to rebuild my AAN?
I intend to buy a few bits like top and bottom gasket set, new head bolts, new bearings and shells and seals etc.
I would probably build this particular engine to 300-350 bhp spec, so I might buy rs2 spec parts.
Only reason I ask is I would prefer to buy it all in one order to save on postage to Ireland.
Who's your best recommendation?

[Jamo]

TPS via S2avant ( Ben ) on the forum or Pete @ Quattro Corner

Can't go wrong with either

[madpugger]

Agreed with Jamo both very helpful.

Audi do not do 'sets' as such, they do everything separately, and a head 'set' works out at around £250
The Head set is pretty rare right now (Reinz version which is the OE one). I got my one from GSF for under £100 posted.
Audi Bearings have shot up in price, so I got..
KS # 77244600 big end set
Glyco H981/6 mains along with A124/4 Thrusts all from AGRA engineering in dundee although there should be dealers in Ireland who can help you there.
Re the RS2 spec, I think Audi list RS2 part #s for ABY and AAN now anyway. Also, you will be able to get head blots etc from Audi near you, however you may want to get ARPs instead. If you do, GET SPORT quattro HEAD WASHERS! my ARP washers pulled into the head a good bit

[Audi Parts Guru]

I would probably build this particular engine to 300-350 bhp spec, so I might buy rs2 spec parts.

What RS2 parts were you thinking of??

[s2_wot]

Trade counter at Donnelon's in Lanesburough. Wouldn't pass them personally. And they can get all that stuff for the ABY / AAN etc

[turbodriver63]

cheers guys for all the tips.
@ s2wot. I never knew they sold off the shelf. Thats probably where I will go as its not to far from me, and they have a good reputation as builders.