ABY Crank locking tool - Part No?

**Jamo** · 4 March 2011, 15:43

Yeah no probs I live in Birmingham

**willg54** · 4 March 2011, 15:50

pm'd you! THANKS!!!

**willg54** · 4 March 2011, 22:23

IT WORKS!!!

2" box section, slot cut out...admitidly it bent but it got the bolt undone!!

**DJones** · 5 March 2011, 00:56

Originally posted by willg54

yes im either in Birmingham Uni or the joys of bromsgrove...if there was any chance you would be rewarded for your kindness

Completely.... off topic... i grew up in Bromsgrove, lived there from 6 until 13. Went to Finstall and Aston Fields was due to go to South Bromsgrove high but left for the South..... happy days...

**s2_wot** · 5 March 2011, 01:00

DJones thought he was going off topic....

Will I see you're a fan of Classic Tractor any good articles about old Deutz or Fendt machines in there?

**willg54** · 5 March 2011, 01:35

That's my dad. He's a agricultural contractor. I'm sure theres many articles on them! They made a very sturdy brace! I'm more of a racecar engineering mag person

I went to Finstall aston fields and south! What year were you there?

**DJones** · 5 March 2011, 10:35

Originally posted by willg54

That's my dad. He's a agricultural contractor. I'm sure theres many articles on them! They made a very sturdy brace! I'm more of a racecar engineering mag person

I went to Finstall aston fields and south! What year were you there?

Crikey... well I'm 42 in a couple of weeks if that helps......

**Jamo** · 5 March 2011, 10:37

I can't believe the classic tractor mags!

**willg54** · 7 March 2011, 11:02

Originally posted by DJones

Crikey... well I'm 42 in a couple of weeks if that helps......

Im 24 in a few weeks...think we're a few years apart

Hopefully i'll be escaping for ever in sept...but going east to northampton all being well!

The classic tractor mags were a vital part in the success of this bespoke tooling setup

**s2 newbie** · 30 September 2011, 11:26

which locking tool do I need for s2 sb? part number?
Many Thanks

**s2 newbie** · 30 September 2011, 12:04

sorry should have been 3b.

Thanks

**piotr** · 30 September 2012, 08:39

locking tool

hi guys-so what is the correct tool for ABY with air con?

**Rusty** · 7 February 2013, 16:16

Found this while searching for the 3256 tool -

http://www.audi.co.uk/content/dam/au...ary%202012.pdf

Lists the tools and prices.

**defcon** · 20 February 2013, 10:13

Does anyone have the measurements of tool 3256, so I can make my own?

**tscheel** · 20 February 2013, 14:03

Originally posted by defcon

Does anyone have the measurements of tool 3256, so I can make my own?

This is for the NG and 7A : http://www.20v-sauger-tuning.de/zahnriemenwerkzeug.htm

Only the depth (34mm) should be different, I think.

ABY Crank locking tool - Part No?

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment