Engine mounts - Can you confirm?

**Tonks4x4** · 10 May 2011, 07:16

Don't forget Bambridge on here makes very nice solid ones and is working on a semi solid version, save on the carriage and silly import taxes

**220bhp** · 10 May 2011, 07:21

How much are they.

**willg54** · 10 May 2011, 07:24

Originally posted by Tonks4x4

Don't forget Bambridge on here makes very nice solid ones and is working on a semi solid version, save on the carriage and silly import taxes

I decided against solid mounts as i'd rather not have the extra vibration. Bambridge's semi solid ones are only in proto-type stage i believe and I kinda need mine soon. Otherwise there would be no question, i'd go to bambridge! I have his solid subframe bushes and they are sweeeeeeeeeeeet!

**Jamo** · 10 May 2011, 07:34

At your power level unless your going for planning for an upgrade use OEM or wait for the bambridge mounts, wouldn't waste time with the 034 stuff

**willg54** · 10 May 2011, 08:45

Originally posted by Jamo

At your power level unless your going for planning for an upgrade use OEM or wait for the bambridge mounts, wouldn't waste time with the 034 stuff

No power updates as yet, but my plan is to buy a 2nd engine next year to build for 400-450bhp for which i'd like some upgraded mounts. but i'd like them now so i dont have to buy 2 sets. I'll give bambridge a shout and find out eta.

**Fat Audi 80** · 10 May 2011, 12:54

Will, I have just put new OEM ones on the engine and gearbox and have noticed the difference. I would echo Jamo's comments, that unless you are going for stupid power stick with the OEM ones.

Cheers,

Steve.

**andy10v** · 10 May 2011, 13:01

A few folk (high power/abuse) on motorgeek have torn the 034 mounts apart and I think Hank now adds weld bead around his ones to prevent this.

**willg54** · 10 May 2011, 13:14

Well I plan on 450bhp in maybe 12months time and dont ideally want to run a set for just a few months...but I suppose I can sell them on after.

I've spoken to Bambridge and might be able to get a set off him pretty soon so i think i may go down this road.

**andy10v** · 10 May 2011, 22:46

Seperated 034 mount from a bad batch, but they can be reinforced.

(semi-urgent) street density engine mounts separating?

http://www.motorgeek.com/viewtopic.php?f=5&t=38703&hilit=density

I'm in the process of installing my engine mounts when i dropped one of my new ones accidentally. the base separated from the mount itself. i looked it over and it doesn't seem like anything cracked or was damaged, and that the two pieces were only ever just slide together(the slide back...

**Thuppu** · 11 May 2011, 05:54

I got custom made PU motor mounts for my UrS. 'AnLe' on our Finnish forum made them and soon when I get the engine rebuild and running we see how they work.

**bambridge** · 11 May 2011, 06:59

Originally posted by andy10v

Seperated 034 mount from a bad batch, but they can be reinforced.

http://www.motorgeek.com/viewtopic.p...&hilit=density

Cant you put a longer bolt thro, then put a ally plate/big washer on the bottom to stop them pulling apart??

**bambridge** · 11 May 2011, 07:02

Originally posted by Thuppu

I got custom made PU motor mounts for my UrS. 'AnLe' on our Finnish forum made them and soon when I get the engine rebuild and running we see how they work.

Nice, Urs4/6 rear delrin sub-frame bushes

**Thuppu** · 11 May 2011, 07:55

Originally posted by bambridge

Nice, Urs4/6 rear delrin sub-frame bushes

Hmm, who made them?

Engine mounts - Can you confirm?

Engine mounts - Can you confirm?

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment