New Poly Engine Mounts

[bambridge]

Just need to wait till Will gets them fitted and tested before we go any further

[A80Avant]

i see
well in my engine even with the phenolic spacer in, it fits now, but if it were a stroker... no way!

as i dont plan to stroke, i should be fine with what i have, however, when i tried to replace the engine mounts with the 034 street density mounts, they wouldnt fit and they would raise the engine as well! they were taller than OEM.

SO these ones should at least NOT be taller than new OEM ones.

[Billman]

[QUOTE=bambridge;580512]

it would be interesting to make a shorter version for strokers+ reverse inlet manifold. Easier clearance...

Thats no problem

Take care....when they are shorter the subframe comes closer.

[macspring]

Look excellent, when are sets for use with the reverse inlet as suggested by vas likely to be available?

Agreed, good call Vas, (in road spec also).

[Sonic]

Look excellent, when are sets for use with the reverse inlet as suggested by vas likely to be available?

[macspring]

Kevin,

Looks lovely, what about road spec ones in due course?

i.e. engine and gearbox.

Us older folk still want comfort in a daily driver, non track car, but still want it like new oem + .

Keep up the excellent work either way. Love your track rod adjustors btw.

[A80Avant]

by the way, which is the one engine mount which has one side being longer and oval in shape in order to move around? is that specific to the rs2?

[A80Avant]

Ah that is convenient for me!!! ill ask him about his impressions!

[bambridge]

[QUOTE=A80Avant;580510]it would be interesting to make a shorter version for strokers+ reverse inlet manifold. Easier clearance...

Thats no problem

[bambridge]

These look great. I will definitely want a set for the avant. What about gearbox and diff mounts, any plans?

Do you mean these
Currently being tested by Brian Tonks

[A80Avant]

it would be interesting to make a shorter version for strokers+ reverse inlet manifold. Easier clearance...

if they dont vibrate, then they are worth it!

[irishs2]

These look great. I will definitely want a set for the avant. What about gearbox and diff mounts, any plans?

[bambridge]

These will be £140-00 a pair delivered in UK.
Hoping that these will be a slightly less stiffer than the track spec ones but without the vibration

[Rikki Kitto]

I'll have a set please, thanks

[s2driveruk]

nice one - they look fantastic. How much stiffer are they likely to be over the stock mounts?