New Poly Engine Mounts

[Morris400]

Are these available for the urs4/6 ?

[turbo20v]

sorry for my ignorance , but has anyone any photos how those mounts are fitted in the car ?
because they look different as original mounts (they dont have thread in the middle)

thanks !

[A80Avant]

Off topic.
Kev have you seen my pm and texts?

Thanks

[bambridge]

Do you have for gearbox also now?

The poly gearbox/tranny mounts

[A80Avant]

Pity. Phenolic spacer is really needed with the Wagner manifold.

[Pat D]

I discarded the phenolic spacer and this is where I'm at Alex. Hopefully when I lower the whole engine down it might be ok, still tight though.

[Error404]

did you end up using a phenolic spacer aswell Pat?

[Pat D]

I have these mounts and a Wagner reverse manifold & can't close the damn bonnet. I'll try 10mm spacers on the passenger side mount and see if that helps, that should leave about 6mm sump to sub frame clearance. I'm reluctant to have a Dremel hack into the bonnet. Stroker block by the way.

[fridtjov-audirs2]

Still have a couple of sets left

Do you have for gearbox also now?

[bambridge]

And the price delivered to the Netherlands?

£150-00 delivered

[bambridge]

Any for a 3B?

Yes Kit, will fit ur, 3b, aby

[quattrostyle]

And the price delivered to the Netherlands?

[K Simmonds]

Any for a 3B?

[bambridge]

Still have a couple of sets left

[irishs2]

Shore 90 afaik







Found some 'milspec' lol motor mount rubber biscuits on the bay, the size if very interesting