I am going from a standard dv to turbosmart dv on a aby . Can anyone help with where to plumb the small vac line to.
Gary
Gary
-
-
It should be same as the std DV, I think on the ABY it goes to the vacuum nipple on the front of the inlet manifold.sigpic
1991 Audi S2 3B - 2.5 Stroker engine
1997 A6 2.5TDi quattro avant - C4
1976 RD250E / 350LC cafe racer -
should it be under the inlet manifold . Mine has no vac line and no nipple for one to be fitted to.
Comment
-
Post a pic of the front section of your inlet manifold... ABY has nipple there with a small hose that connects to a metal pipe that sneaks behind the timing belt and appears near the MAF pipe where you attach a short section of flexible hose to the DV.Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don't
Comment
-
thanks for that paul i was looking in the wrong place.
I'll get to it tomorrow.
Comment
-
All plumb in thanks for the help. Now at the risk of embarrassing my self again. When it comes to adjusting the re plumb from soft to hard is it all down to the individuals preference or is there advantages to be gained by a certain setting.
Thanks in advance Gary.Comment
Comment