Boost problems cant get over 0.2

[S2sedan]

Hi

I´ve made RS2 mods on my ABY, i was running very rich, while trying to set up my car.
The boost cut over 1.5 came up a few times, causing a very strong cut.

After a few time the car couldn`t get boost over 0,2 bar.

It happens suddenly on the highway

today i took the car to the local stealer and look after a boost protection. There was a boost fault code realy. The guy erase it with no problems, when i ran with the car the boost still not coming over 02-03 bar ....

ANY IDEA :?????

I going nuts .......

PS: I could not here for any boost leaks (that usually make noise)

[S2central.net]

Almost certainly a major leak - often you cannot hear them driving - you need to properly pressurise the turbo hoses system. Also check the WG diaphragm, the control hoses, the WGFV and the TBV.


Paul

[S2sedan]

Yesterday, when I arrived home, I took the air box out, and start looking over WGFV, and Dump. The upper hose on DV was missing. I just conect it again, and guess what ... boost again

thank you for your time, Eduardo