034 coil kit fitting

[QuattroFever]

Settings all look ok. Before i go checking tdc and firing order, anything obvious i may have missed? I connected the loom plugs right and put the numbered pnp loom tails 1 to cyl 1, 2 to cyl. 2 etc... That right or do they need connecting in actual firing order eg 1st cyl to fire then second to fire etc. BTDT's please. No info in 034 article section.

[Mark.se]

Don't know if this is any help. I fitted mine a while ago now

http://www.s6-audi.co.uk/index.php?option=com_content&view=article&id=46&Itemid=21

[driftin jo]

Wait till coil goes and you try and get a replacement........

They come with a lifetime guarantee, I had one of mine let go after 18 months and 034 replaced it
without question.
You can't get better than that IMO.

[QuattroFever]

ok spotted something.

both four pin plugs from POS... the OEM black plug populated with three pins that is supposed to be connected to the 034 four slot plug populated with 2 pins only fit together one way as per OEM, but if you put them into each other only one of the pins makes contact?? that cant be right surely?

I know this is a kit for an AAN should it be any different on an ABY.

if this is a major mistake it throws into question the other POS plug which is fully populated with 4 wires and all the wiring on that adapter loom.

[QuattroFever]

Looks like POS channels have been swapped by previous owner. One of the terminals in the little purple part of the plug had been inserted the wrong way. Put back to original and she fired up great!