236 AAT tall block weight??

[Rocco]

fast question to see if there are someone who knows it.

the approximately weight of one 236mm tall block EMPTY, with only the crankshaft + it´s caps/holders , no rods and no pistons

i think only the crank is 22kG ,and the complete block?

[spink]

fast question to see if there are someone who knows it.

the approximately weight of one 236mm tall block EMPTY, with only the crankshaft + it´s caps/holders , no rods and no pistons

i think only the crank is 22kG ,and the complete block?

hmm,about 90kg?

[Rocco]

I would like to see 70 kg...better than 90

[Jamo]

No way is the block that heavy when stripped out

my pallett delivery of block, rods, crank, turbo, intercooler, clutch, flywhee, nuts, bolts, filter, sump etc was less than 100 kg

[Error404]

Having picked up a complete 7A bottom end yesterday that was really heavy, about 90-95kg. So just just block and crank I would say 65-75kg.

[will20v]

just weighed my block with main caps 55kg and standard 2.5 tdi crank 22kg
so 77 kg for block and crank
cheers
will

[Rocco]

just weighed my block with main caps 55kg and standard 2.5 tdi crank 22kg
so 77 kg for block and crank
cheers
will

without pistons -rods and bearings?

if it is 77kG + the pallet will means a rounded 80kg....

[Error404]

pallet will weigh about 10-15kg