You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
or ABY or ADU, i.e. is the center to center wrist pin to big-end distance the same and the rod journal width the same?
Somebody has a line on some 1.8T Scat rods but wants to use them in his AAN. I am not familiar with anything on the 1.8T except the coilpacks and the BPV.
RS2'd 93 UrS4 5 spd sedan
94 UrS4 V8 6 spd manual avant
answer are no; they doesnt.... org AAN are the 144 x 20....
Actually they do fit. In early years the 1.8T AEB used the same PIN diameter as 2.2T 20V 20mm. Later they changed the PIN diameter to 19mm. The length should be the same 144mm.
Depends on which 1.8t they came with 19mm and 20mm wrist pins. 20mm being AGU BAM APY etc....If they are aftermarket with 20mm wrist pins then they are the same. The only issue you may have is the fact that as they were originally sold as a set of 4 and the 5th one is an add on it is not going to be correctly balanced as a set.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment