MFTS F76 wiring colours ??

[John B]

MFTS contact housing

Quite often the contact housing becomes brittle after exposure to heat for long periods. I had to replace mine and move the contacts across one wire at a time. Also had to purchase a new MFTS. Anyway works a treat now .

Here's a picture of the housing: -
tn_DSC01982.JPG

JB

[UrS4boy]

so it will be you getting pm'd when i decide to go coil on plug haha!! lucky you!!

Coil on plug 3B has been done by several people here. No need to reinvent the wheel.

[caterpillar]

Coil on plug 3B has been done by several people here. No need to reinvent the wheel.
dont use that: i dont know avout using cop on 3b.... im a newbe on audi....

[Pat D]

Quite often the contact housing becomes brittle after exposure to heat for long periods. I had to replace mine and move the contacts across one wire at a time. Also had to purchase a new MFTS. Anyway works a treat now .

Here's a picture of the housing: -
[ATTACH]37550[/ATTACH]

JB

Is that housing an Audi only part, or are there similar plugs available elsewhere?

[CQ20VTurbo]

+ - Voltage supply, term. 15a (battery voltage)
C - Actuation of coolant temperature warning lamp (overheating) (termoswitch)
R - Air conditioner safety shutdown (termoswitch)
T - Actuation of coolant temperature gauge (9,8 ... 10.4 V from dash)

Hello everyone,

I need to dig up a very old thread about the F76 (I have the ABY installed in my CoupeQuattro Type 85)....

I've been searching for the information about the F76 in thread #6 for a long time, but I just found it on your site...

What exactly is switched on PIN 1/T of the F76, =>

• Ground / Masse
• or
• +12 V?

Does the voltage come from

• Minicheck / KI
• or
• does it come directly from the F76?

I would be very happy if someone could help me with this information !

Greetings from Germany

[CQ20VTurbo]

sorry Double Post !