550 to 600 hp which injectors ?

[Jamo]

Which they were hence me saying that I have been running the short ones for 3 years now

[roger shaw]

now confused

the picture is not very clear and also used for other injectors

from the picture it looks like o-ring to o-ring is 52mm(or 57mm)

measuring the rs2 injector it looks to be 66mm o-ring to o-ring,overall 77.39mm

[Thuppu]

Normal EV14 size 0-0 49mm, long body EV14 61mm, AAN/ABY 0-0 61mm.

Wasn't Jamo telling in his project thread that he modded the fuel rail seizing or something..?

[prj]

Five o ones are direct fit no adapters

If you actually clicked the link... (looked up the eBay item code)

[prj]

now confused

the picture is not very clear and also used for other injectors

from the picture it looks like o-ring to o-ring is 52mm(or 57mm)

measuring the rs2 injector it looks to be 66mm o-ring to o-ring,overall 77.39mm

Those injectors you pasted will be too short unless you either fit adapters or modify your fuel rail. Period.

[roger shaw]

for referance the the rs2 injector O to O are 66mm

roger

[Ross]

With the EV14s, use the anodised black finjector spacers or equivalent and Ford racing electrical plugs - buy another set of fuel rail clips and you can hold the whole lot in place, spray them black for a stealth look ala my install

I like the idea of an ANSU set as per RWD19T's post - stock size and plugs with EV14 internals... even better.