Can i get a generic map ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ian4455
    S2Forum Maniac
    • Nov 2010
    • 787
    • Country: England

    #1

    Can i get a generic map ?

    I'm building my Engine shortly, maybe 750cc injectors etc etc question is can i get a generic map to allow me to drive my car to the people that can map it correctly ?
  • AndyP
    S2Forum Zealot
    • Feb 2004
    • 6049
    • Country: England

    #2
    Originally posted by ian4455
    I'm building my Engine shortly, maybe 750cc injectors etc etc question is can i get a generic map to allow me to drive my car to the people that can map it correctly ?
    If you can't get a map, just leave the std injectors in and disconnect the WGFV, that's what I did with mine and it ran fine. Swapping the injectors when you get it mapped is a 20min job.
    sigpic
    1991 Audi S2 3B - 2.5 Stroker engine
    1997 A6 2.5TDi quattro avant - C4
    1976 RD250E / 350LC cafe racer

    Comment

    • Ross
      S2Forum Possessed
      • Aug 2005
      • 3399
      • Country: England

      #3
      Same here, after my rebuild I just ran it in on standard rs2 injectors - didn't even unplug the WGFV just moderated with my right foot and kept it off boost, lower RPM as I was running in anyway. Swapped injectors at mapping time.

      On the other hand, Sonic has a PRJ 'running in map', for his EV14 550cc and K26/7 set-up.
      AUDI - saving Dad's from minivans since 1994

      Comment

      • ian4455
        S2Forum Maniac
        • Nov 2010
        • 787
        • Country: England

        #4
        ok cheers for that, just as well i still have a standard set of injectors to hand.

        Comment

        Working...