VEMS settings for 3b Coil pack Conversion

[ian4455]

Hi, does anyone have the correct ignition settings to use for this V8 coil/pin swap on a 3b for a VEMS config file that works for this ignition setup?
06E905115E V8 Coil packs

[a4kquattro]

If you've wired the ignition outputs the same as the PnP AAN ecus, its like so from top to bottom:

Stepper D
Ign 4
Stepper A
Stepper B
Stepper C

but again, it depends how you've wired your coils. On my configs the above order corresponds to:

Stepper D = cyl 1
Ign 4 = cyl 3
Stepper A = cyl 5
Stepper B = cyl 4
Stepper C = cyl 2

[ian4455]

I've wired these as follows -

Pin 1 Cylinder 1
Pin 2 Cylinder 2
Pin 20 Cylinder 4
Pin 21 Cylinder 5
Pin 23 Cylinder 3