Rear crank seal?

[Rikki Kitto]

Still debating if I should change this whilst the engine is out doesn't look too bad and the part is £100 from audi. Opinions please

[JP]

Buy the elring one from gsf for a £10-15 from a 1.8 16v kr engine. Seal only its the same one as on ours. Press the old seal out press the new one in. Same quality as original as they are made by elring.

[Thuppu]

Same is the Victor Reinz seal. You press it in the "bracket".

[Rikki Kitto]

DOH! ordered it now

[UrS4boy]

Buy the elring one from gsf for a £10-15 from a 1.8 16v kr engine. Seal only its the same one as on ours. Press the old seal out press the new one in. Same quality as original as they are made by elring.

Any PNs on the Elring or Victor Reinz seals? Audi did show an PN for item 2 below and one point but now it says Item 2 is discontinued, buy item 7 (as shown in the photo)

[driftin jo]

So they can't sell you a seal, but they can sell you a aluminium housing
with a seal in it for £100, sounds like a con job. :corey:

[Rikki Kitto]

Any PNs on the Elring or Victor Reinz seals? Audi did show an PN for item 2 below and one point but now it says Item 2 is discontinued, buy item 7 (as shown in the photo)

I need the part number for 20 in this pick can you scroll it down for me please

[Rikki Kitto]

So they can't sell you a seal, but they can sell you a aluminium housing
with a seal in it for £100, sounds like a con job. :corey:

Managed to get it for £72 from a mate who works at VW

[UrS4boy]

I need the part number for 20 in this pick can you scroll it down for me please

034103043 = 7A, NM, 3B and ABY

[Acidburn]

Managed to get it for £72 from a mate who works at VW

you'd get a full headgasget set with the seal in for that price, or do what jp did above and save loads of money. Audi nearly got me with this till jp told me.

[Jamo]

This is old news Audiman posted these details up in 2004
72 quid? Wtf could have bought a head gasket set for that price
I have 3 of these seals knocking about time to put them on eBay

[Rikki Kitto]

034103043 = 7A, NM, 3B and ABY

[UrS4boy]

That is for item 20 in the diagram, not the seal.

[Rikki Kitto]

Yes cheers, it is the gasket for the sump side section I need this too