Fuel Pump connector size

[Jamo]

Anyone know the size of this fitting? I've seen it replace with a AN fitting on RS4's and URS4?

[Error404]

you need some gloves dude

Think its M12 x 1.5

[Jamo]

Those are Madpuggers hands not mine

[Jamo]

Has anyone ever unscrewed it from the cap and know what the other side thread is?

[UrS4boy]

You just need one of these:

[Jamo]

yeah thanks for that, but I don't have the part with me and I would like to buy the fittings in advance if anyone knows the answer

[driftin jo]

Do you mean the connector threads or do you mean the thread is inside the plastic ?
If you mean inside the plastic there isn't one, it's just pressed in, you cant unscrew it.
I can upload a pic as mine rusted up so bad it split the plastic and I had to get a new one.
The external one on the inside of the tank is m14x1.5 the internal one on the top of the cap is m12x1.5.

[Jamo]

Do you mean the connector threads or do you mean the thread is inside the plastic ?
If you mean inside the plastic there isn't one, it's just pressed in, you cant unscrew it.
I can upload a pic as mine rusted up so bad it split the plastic and I had to get a new one.
The external one on the inside of the tank is m14x1.5 the internal one on the top of the cap is m12x1.5.

Perfect thanks

[driftin jo]

The outside diameter of the body of it is 20mm for ref if you were going to press it out and replace it with something, however if it is rusty it may well split the plastic trying to remove it.

[Jamo]

I'm just making contigency plans about a madcap solution if the postman doesn't hurry up.