coil pack plugs

[bilko0795]

Had a nice pressy today four new beru coil packs and four new connectors from Tps cardiff only thing is the connectors have nothing to connect the wires from the packs to, can you get the metal spade connectors from halfords or any other motor factors and is there a diagram on here that shows how to do it. Im now £££££££££££s lighter in my bank account don't tell her in doors or there could be and

[UrS4boy]

Had a nice pressy today four new beru coil packs and four new connectors from Tps cardiff only thing is the connectors have nothing to connect the wires from the packs to, can you get the metal spade connectors from halfords or any other motor factors and is there a diagram on here that shows how to do it.

You should have got Item 24 in this diagram, PN 443906247. 443906247 takes the male pins in the second diagram

[Rusty]

Good luck getting it all sorted having rebuilt my coilpack wiring, it's a real headache of a job I still don't know how I managed to get it al lback together and working without an issue.

[bilko0795]

Can anyone confirm if p/t no 907-326-03 is the right connector terminal
for p/t no 443-906-247.

[benntenn67]

Had a nice pressy today four new beru coil packs and four new connectors from Tps cardiff only thing is the connectors have nothing to connect the wires from the packs to

Via Scotchlok's ?? http://solutions.3m.co.uk/wps/portal...tap-connector/

[Error404]

You buy the JPT terminals from here mate:

http://www.autoelectricsupplies.co.uk/product/680

Or you can buy them on the yellow repair wires and solder them on, but I prefer to crimp

Or if the old terminals are still in serviceable condition, its is easy to extract them from the hold housing