Restrictor for 3B

[s2-1.5bar]

Will the oil sump restrictor from ABY (peace of sheet metal that goes between sump and crankshaft ) fit the 3B engine?

Thanx

Andy

[SteveH]

They are the same AFAIK. The 3B should have one of these fitted as standard.

[s2-1.5bar]

On ETKA it doesnt show on 3B engine, whats why I asking. I thinking to fit one, just need to be sure before ordering one.

They are the same AFAIK. The 3B should have one of these fitted as standard.

[s2avant]

Fits both 3B and ABY.

Part number 034 103 623 A which retails @ £19.88+VAT

Shown on illustration 103-20, item 14a in the latest version of the family album.


HTH,

Ben

[s2-1.5bar]

Hi Ben

I agree with u. But mine is from 200TQ and the sump has this plastic. When I looked on ETKA its different scenario for 3B Coupe and 3B 200 tq.

Picture of 3B 200TQ

Fits both 3B and ABY.

Part number 034 103 623 A which retails @ £19.88+VAT

Shown on illustration 103-20, item 14a in the latest version of the family album.


HTH,

Ben

[s2-1.5bar]

3B of Coupe

And why its shows 2 sump gaskets?

[audiman]

Yeah make sure you get 2 new sump gaskets tho. one for each side of the splosh tray thingny

[s2-1.5bar]

Thanx,


Seems will be phoning to german-swedish and asking for 2X sump gaskets for T4 Transporter 2.5. The ones from stealer bit expensive ~£20 each.

Following the thread:

Does anybody know-remember how many short hex screws and how many longer hex screws required to bolt on oil pan?

And do I need to remove this plastik thing from my oil pan before fitting separator. Look at the pics

Cheers

Andy

[porkkis]

It's weird why 200-20v and S2 both have the engine code 3B as there are many of these differences, flywheel, clutch, breather, boost pipes, and apparently also in internals as in this case. Weird!

[s2avant]

The block and sump are the same as 3B coupe versions so you could fit the 034 103 623 A with two gaskets. Trust me, I'm the parts daddy

The 034 103 623 is listed for 7A engines on A80 and coupes.

As for the bolts:

19 M6x25
6 M6x65
3 M8x25

Ben