How suitable is this turbo for my S2?

[nickhey]

Perhaps some time this week. The maps and stuff are on another computer...

Would be a good way to verify some of the calcs, as I'll be able to give you the dyno-plots after this weekend. You could possibly build some sort of compensation coefficient into them from that?

[S2sedan]

Paul,

how much torque and hp a RS2 turbo will deliver as it best ???
I thought that it could make about 500nm of torque.
Am I crazy ???

[S2central.net]

RS2 turbo can deliver 360-370bhp at the redline and YES it can easily exceed 500Nm of torque in the midrange.

Paul

[Swiss_Sedan]

hi all

Since this is my first post here I really have to say, that this is a great forum. Already found lots of helpful info here...

back to topic: I've also been looking at these 034efi turbos for quite a while and I was wondering if the K26-T3 hybrid they offer would be a good fit on my ABY engine. I'm planning to revise my engine sometime soon and therefore I'll also get a new turbo. Now my question is: Is it possible to use this K26-T3 without remapping the ecu (I'm still running oem ecu) or would that result in bad performance or a broken turbo? Because as far as I can see, this turbo should have less (or same) lag than the S2 turbo but a slightly better output on hi revs.

Thanks for any inputs!

regards from cold Switzerland,
Matt

[S2sedan]

Paul, so why will somebody wants this type of turbo that you are talking about, if it is "worse" than the RS2 turbo ??? Sorry for my ignorance

[Billman]

What are you sayn' about this turbo? What is the difference to the other

K26/T04E HIGH OUTPUT Hybrid Turbo

Here is the link http://www.034efi.com/catalog/produc...04ec905b62ccc8

There is the K26/T04E Hybrid and then the High Output Hybrid! Any infos here???

There is Also a RS2/Garret Replica turbo!

Here http://www.034efi.com/catalog/produc...products_id=75

How is this going to be instead of the KKK RS2?

Bye