Water Manifold Seal part numbers please

[s2_wot]

The water manifold that plugs into the side of the AAN/ABY head has 3 yellow rubber O-Rings and a black triangular shaped rubber gasket.

Could anybody furnish me with the relevant part numbers please?

[Christophski]

Sorry bud, it was in the kit with the rest of the engine gaskets from Victor Reinz...

[Drummer87]

Tried ringing tps to find out or Kate

[Wheeljack]

Gasket: 027 121 139 A (X1)
O-ring: N 028 203 4 (X3)

/end thread

[irishs2]

[s2_wot]

Thanks everybody.
Ordered just in the nic of time.

[s2_wot]

Gasket: 027 121 139 A (X1) purchased at €4 each

O-ring: N 028 203 4 (X3) NLA no replacement suggested. The only information is that it's a 15mm x 2.5mm O-Ring. Looks like I'll have to acquire an O-Ring from an industrial supplies. It'll probably be cheaper too. I'll report back if I discover anything else.

[Wheeljack]

Leave it to Audi to let a standard size o-ring go NLA. Bloody ******s...

I can get them from my online parts supplier in the USA...genuineaudiparts.com
Maybe your parts counter guy can't run ETKA?

FYI, both of them also come along with Reinz top end gasket kits...



If you do source them elsewhere, make sure to get silicone o-rings. Standard materials from industrial suppliers are typically buna-n or viton.