homefries chip, torque?

[Gavin A]

On an ABY with homefries chips (also has decat/rs2 airbox & unknown s/s exhaust) stock K24 7000 ect.. so around 285 hp

what sort if torque can be expected?

also has anyone done a 1/4 mile with this set up?

[Rusty]

Torque between 300 & 330 ftlbs, power 280-295 bhp depending on car & dyno. Looking at low 14, high 13s 1/4 for a road car, less if it's stripped out.

I got the 0-60 time down to sub 5s on a Homefries setup but that took some stripping.

[rynaqui]

Depends on launch mostly 1/4 time. If you get it right, will absolutely fly in 1st gear

[martinws]

What sort of wheel horsepower have people seen? I have a PRJ mapped ECU , big IC and a Bosch 044 and got it dynoed at 238HP at the wheels? This is in my typ85 90Q with ABY fitted. That ran a 13.9 Quarter mile before it had that ECU fitted. A far lighter car than a standard S2 though.

[Rusty]

I had ~240 bhp at the wheels too.

[andy10v]

What sort of wheel horsepower have people seen? I have a PRJ mapped ECU , big IC and a Bosch 044 and got it dynoed at 238HP at the wheels? This is in my typ85 90Q with ABY fitted. That ran a 13.9 Quarter mile before it had that ECU fitted. A far lighter car than a standard S2 though.

Still slower than a 3b

[prj]

No real point to compare different dynos.