Aftermarket connecting rods recommend?

[popdemonic]

Since i'm going to rebuild my AAN in a very soon.I have GT2871 turbo running on E85.
My goal is something around 400crank hp on this turbo.so i think it's worth to do upgraded the stock rods at the same time.i found a lot of aftermarket rods available with various price.what rods would you guy recommend on my goal?in case of doing the stroker what parts do i need further to complete it?

[driftin jo]

contact, aronmatic2 on here for conrods, very good price and
quality product used by many people.

[nip]

Since i'm going to rebuild my AAN in a very soon.I have GT2871 turbo running on E85.
My goal is something around 400crank hp on this turbo.so i think it's worth to do upgraded the stock rods at the same time.i found a lot of aftermarket rods available with various price.what rods would you guy recommend on my goal?in case of doing the stroker what parts do i need further to complete it?

personally i would change the rods pop, i ran 400hp on standard internals.
If u do change the rods as drifting jo says aronmatic2 rods are perfect choice

[prj]

Pretty much no point to change them for the power level, but if you are having the entire engine apart anyway and measuring everything then it is a small price to pay, because you are essentially making your engine future proof.

And yes, try fcp-engineering.com or aronmatic2 on here.

[Pat D]

I went with 159mm rifle drilled Pauter rods for my stroker project, the finish of them looks great and I'm sure they will perform well.

[caterpillar]

I went with 159mm rifle drilled Pauter rods for my stroker project, the finish of them looks great and I'm sure they will perform well.

nice pc's those rods....!!

[Mcstiff]

Iroz Motorsport (Hank Iroz of urQ fame) stocks H and I beams http://www.irozmotorsport.com/audi-5-cylinder/