will a s4/6 inlet fit in a S2????

[recall]

Just putting my car back together and my inlet that i have made is not going to work.

will a s4/6 inlet go in a S2??? or will it hit the rad????

I have converted to eclectic power steering so no to worry about.

lance

[Error404]

You would need to angle the rad to give clearance, but it is doable

[recall]

Brilliant cheers error.

i will order one right now.

[Acidburn]

Yes

Check Vincent's red coupe on here, real nice install.

Or if you don't mind moving the throttle body to the front check steveh the mod's car.

You need inlet, fuel rail and water rail if going with the s4/6 aan stuff.

Speak with spink he will most likely have all this for you.

[macspring]

Brilliant cheers error.

i will order one right now.

I presume you mean, you will buy one second hand ?,

As Acidburn says, Spink is the person to contact.

Kind regards.

[macspring]

Vincent's red Coupe is lovely.

Flick through this thread, the car uses a Civic radiator ?

http://www.s2forum.com/forum/showthread.php?t=61438

Somebody like Pro-Alloy or the like could maybe do a custom one for an easy fit ?

If someone did brackets to mount a standard ABY radiator at a 45 degree angle to allow the use of ANN manifold I reckon they'd have a lot of customers ?

[recall]

Well after a lot of mods.

Custom rad. pipes. powersteering ect ect ect

i am winning.





lance

[Rocco]

can you explain more about the electric power steering friend?


i believe Dhalback RACING sells one kit for +500€

[Sleeper_Avant]

how did you wire up that PAS unit fella?
pics`d be good

[recall]

I am just in the middle of testing the power steering at the mo.

As soon as i am 100% and all works as should i will put up a gide.

Bloody given me brain ake lol

lance

[Acidburn]

Get one off a pug or saxo, cost around £35 quid all in off ebay then just get some pipework and mount it under the rear by the diff. Its been done by another forum member ages ago on here.