Torque Settings for Rocker cover

[APNess]

Hi all - changed the Rocker cover gasket before I went up to Scotland hoping to cure a lil leak, but it's dripping again.

Anyone know the correct torque figures to clamp that sucka down?

It's not a bad oil leak, more a drip that leaves a little oil patch occasionally but it's annoying knowing it's there. Checked th oil and if anything there's slightly too much in, so I'm not worried at the moment.

PJ

[Jamo]

APNess, reference Mikes site: http://www.s2-audi.co.uk/tech_articl...e_settings.htm

[APNess]

APNess, reference Mikes site: http://www.s2-audi.co.uk/tech_articl...e_settings.htm

Cheers, v useful, will print that off and keep it safe.

[S2 Ant]

Handy stuff, as i needed to know some of them too, cheers Jamo

[Jamo]

Mike's site is like a technical bible!, I believe (with his permission) that there should be a link to it off the forum as i've found it invaluable.

http://www.s2-audi.co.uk/technical.htm

[spencerboy1983]

hello i have a audi coupe quattro 2.2 10v it has a slight rocker cover leak, i have changed the gasket but im not sure what the bolt torque setting is does anyone know? thanks.

[Mikes2]

It's always 10 Nm

[Dobby84]

Do the settings differ from engine to engine?
Are the settings shown in the link for an ABY or 3B etc?
Very useful stuff to know by the way!