Fusebox seal available ? Part no. ?

[QuattroFever]

Anyone know if it's available or a suitable replacement?

Pics in the stealers don't have it illustrated as even having a seal.

Thanks in advance.

[epic]

Lid seal or main box?

The lid seems to come with the seal 8A0941801. S/H lid with seal would be easy to get.

Main Box shows not seal but Sikaflex etc would work fine here.

[benntenn67]

Box to scuttle seal - looks same stuff as coupe rear lamp cluster cord seal

[Drummer87]

Dum dum, ring Audi for a few metres

[rynaqui]

Dum dum, ring Audi for a few metres

Probably on Back Order and costs a million billion

[benntenn67]

Probably on Back Order and costs a million billion

... Actually not that bad in Audi terms - £40 for 4 metres & still available

[rynaqui]

Good to hear

[Drummer87]

Maybe if you make a thread titled spare dum dum, people will have some left over.

[rynaqui]

Didn't know it was called dum dum, cheers

[benntenn67]

Maybe if you make a thread titled spare dum dum, people will have some left over.

I have a roll of it

[Pat D]

I use that non hardening window sealant that annoys the hell out of you because it gets everywhere, but what I do is put a bead down and then place a really thin plastic sheet over it so it doesn't actually make contact with the other mating surface and makes for an easy non messy removal if need be, but is thin enough to allow the bead to spread and form a good seal. I noticed some fittings such as the trim pieces bolted to the side of the car are done this way by Audi and I just copied that idea when putting them back on.

The plastic sheet I used was flimsy cheap 2 dollar plastic drop sheet stuff you can get from hardware stores, etc. HTH

[Drummer87]

For the rear lights I used tiger sealant as recommended by Pete. Done the job.

Woap this is my 1000th's post!! I'm an extremist

[QuattroFever]

Yer, was the fusebox to scuttle seal. Dum dum it is then