thread size of fuel line connectors in engine bay

[Jeffer]

I need to find out the thread size of the fuel line connectors that go to the fuel rail. I'm replacing the old flexible fuel lines for new goodridge ones. For that i need to put an adaptor on the steel lines to fit the -AN lines to. I think its M12 x 1,5 and M14 x 1,5.

Is there anyone that can confirm that??

Thanks

[audiman]

I can look on ETKA for you. See what it says. Why not just fit some petrol hose to the original fixings?? That braided hose is just a 'posh' way of doing it. They are only crimped on with a clamp, just like a jubilee clip

[audiman]

ETKA doesnt list the size of the threads

[Jeffer]

Is an option aswell, but I'm taking the posh route.
If you could check it out for me then please.
I have the 3B metal fuel lines, and the ABY fuel rail.
The 2 connectors on the rail are the same size.
The 2 metal ones differ from eachother

[Jeffer]

ETKA doesnt list the size of the threads

ah *****

[Jeffer]

I can look on ETKA for you. See what it says. Why not just fit some petrol hose to the original fixings?? That braided hose is just a 'posh' way of doing it. They are only crimped on with a clamp, just like a jubilee clip

Yo Tom,

Looking for a new team member for team bodge
I just found out that the wheel studs from an RS2 fit the flexible hose coupling
Can you check it out in the ETKA what their size is?
RS2 wheel studs (if you misunderstood me)

Thanks

[audiman]

RS2 stud is M14x1.5

[Jeffer]

RS2 stud is M14x1.5

Thanks,

M14 x 1,5 and
M16 x 1,5