Wastegate needed: X-Parts, 034MS ???

[M_GORDON]

Hi guys.
This May 1st was with some friends playing cars and as you know one of my friend have a RS2.
It turns out that beheld his car, I found the reason why a lot of running but went into limp mode.

It wasn't the N75 or the wiring, it was the wastegate valve!
I released the spring and the diaphragm and found that the valve was not slack ... what happened is that the valve was tad twisted and pinned to the seat!!


He won't repair it. Don't want to spend € 200 reburfixing her old wastegate. Like I made 2 years ago.


Now ...
I found several Wastegates, but I need to be plugandplay.
So, I have seen one on ebay.de brand X-Parts for about 250 €. But, I don't know how what this will. If is a "China" and will **** or what!


PS: the other one is the Tial 44 plugandplay too, but the price is going on to 650 USD plus shipping.


Which would have to buy?



Thanks a lot.

[PRY4SNO]

IMO this is the best one available on the market.

http://www.synapseengineering.com/v4/wg/

Otherwise, look for a Tial that will fit your application.

[Rocco]

200€ sounds pretty crazy for a wastegate "rebuilt"

i paid 60€ for mine ,the same as Jorge. i dont know where did you go

[M_GORDON]

Mine was 120€ plus "work time".

[M_GORDON]

IMO this is the best one available on the market.

http://www.synapseengineering.com/v4/wg/

Otherwise, look for a Tial that will fit your application.

But... this isn`t plugandplay, not?

[M_GORDON]

My friend wnat run with the car

[M_GORDON]