2.0 20V NM rods question

[baihui]

Hello Guys,

so I have rods from 2.0 20V NM engine and as far as I know the rods are the same as the S2/RS2 engine.
I am thinking to use them on my 1.8T AEB however I lack information about their dimensions and most importantly if the NM rods are stronger than the genuine AEB rods.
So I would like to ask anyone who knows 100% for sure if that is the case and if there is anyone who can provide me with pictures or site around the dimensions for BOTH rods (NM and AEB).

One more thing, I contacted some German tuning shop and they told me that the tuning AEB rods have oil drilling. I am not an expert but as far as I know all rods should have oil drilling holes for the oil, but please feel free to explain me what that might mean and share some pictures.

CHeers !!!

[dominator]

Слагай смело, по-добри са от на 1,8т!На всеки петак са по-добри!

Put them, they are stronger than these from 1,8t engine!

[caterpillar]

AEB conrods are different, from the 20v 5pot.. AEB may be revolverdrilled for the xpin;BUT they are only 19mm xpin...the usual 5pot are 144x20 conrods.. the xpin are 20mm.. and some of the 3b one does have the revolverdrilled xpin...
if you want to change conrods; buy h-profil onesanyway... cheapest and best choise....!!