ur turbo digital boost gauge

[mo221]

Hi does any one have a wiring diagram of how the digital boost gauge operates on a 1985 ur turbo? my car has had a 20v aby engine fitted.
it looks like it picks up the signal from some sort of senso as there are no vacuum pipes going to the clocks

Cheers

[Tonks4x4]

You have to run a new wire from the ECU plug to the gauge wiring.

The details of the ABY pinout are on S2Central.net


Tonks4x4 - The Land Rover Specialist

[mo221]

hi thanks for the reply but i cant seem to find it? its probably right in front of me but I cant seem to find anything about connecting digi dash to aby engine

cheers

[johne]

ECU pin 32 according to S2central.net

John

[mo221]

thanks every one
but which pin does it connect to on the digi dash on the ur?

cheers

[Tonks4x4]

I forgot to look today in my notes however all the wiring diagrams for the UR are on the late Phil Payne's website. Isham Research.



Tonks4x4 - The Land Rover Specialist

[mo221]

Thanks Tonks, Ive had a look at that website and so far worked out it connects to pin 16 of the clocks??? its quite hard to read the diagram as it looks like a scanned copy of a original schematic! can you confirm this?

cheers

[george21]

Thanks Tonks, Ive had a look at that website and so far worked out it connects to pin 16 of the clocks??? its quite hard to read the diagram as it looks like a scanned copy of a original schematic! can you confirm this?

cheers

i just done my one, not without Brian's help thou!! thank you BRIAN!! yes it's pin 16 on the green digital clocks on ur .signal from ecu 0-7 volts. i have all pinouts for digital dash. send me your email and i send you a file you can print it.

[mo221]

Thanks Brian/George for pointing me in the right direction!

Ive pm'd you my email address Geroge And thanks again!