Tweet
I read this article! What do you think about it?
http://autospeed.com.au/cms/A_0670/a...popularArticle
Greetings
http://autospeed.com.au/cms/A_0670/a...popularArticle
Greetings
-
Go Holset or Go RS4 -
Autospeed are the ppl who try to get power from anything for as cheap as possible. They will also tell you to mess with a resistor on the intake temp sensor so you get a few free horses extra...
IMHO it's pure crap. I wonder who can actually complain about wastegate creep on this forum...
Mihnea'98 Silver Grey 2.7T S4, dual 2.75" turbo back exhaust with no cats, FMIC, BIG injectors, 10 Bar motorsport fuel pump, modded RS4 turbos, tubular exhaust manifolds, custom intakes, RS4 MAF, Bilstein PSS9, H&R ARBs, 19" BBS CH, custom remap, 511 BHP/505ft-lbs
www.MRCTuning.com
info@MRCTuning.com
Workshop Directions -
If i am not wrong with this mod the ECU cant control anymore the boost or am i wrong??Go Holset or Go RS4Comment
-
Yup, totally correct, this mod bypasses the ECU boost control, at least partially...
Pure crap as I said before. Most of the stuff on AutoSpeed is about the same....
Mihnea'98 Silver Grey 2.7T S4, dual 2.75" turbo back exhaust with no cats, FMIC, BIG injectors, 10 Bar motorsport fuel pump, modded RS4 turbos, tubular exhaust manifolds, custom intakes, RS4 MAF, Bilstein PSS9, H&R ARBs, 19" BBS CH, custom remap, 511 BHP/505ft-lbs
www.MRCTuning.com
info@MRCTuning.com
Workshop DirectionsComment
-
-
I dont get any problems with wastegate creep. std wastegate is good for 480 at least
sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
Comment