Bosch 040 Fuel pump

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Chris P
    S2Forum Enthusiast
    • Dec 2004
    • 145

    #1

    Bosch 040 Fuel pump

    Not managed to find an answer to this one. Does the Bosch 040 fuel pump fit in the standard basket of a coupe without having to do the mods as the 044 pump requires?

    Thanks

    Chris
  • GazzaG60
    S2Forum Freak
    • Mar 2007
    • 4133
    • Country: United Kingdom

    #2
    not sure to be honest but the mods needed to fit an 044 are veery small.

    get a 3b basket and its easier again.

    Comment

    • Chris P
      S2Forum Enthusiast
      • Dec 2004
      • 145

      #3
      The 040 is £50 cheaper and i know my car will not be going higher than 360 BHP. If you do have to do the mods then i probably will go for the 044.

      Comment

      • GazzaG60
        S2Forum Freak
        • Mar 2007
        • 4133
        • Country: United Kingdom

        #4
        fair doo's

        I bought 2 x 044 second hand for 100 quid.

        maybe a walbro 255 would, be a better cost/fit too.

        Comment

        • UrS4boy
          S2Forum Obsessed
          • Feb 2006
          • 11859
          • Country: Canada

          #5
          Originally posted by Chris P
          Not managed to find an answer to this one. Does the Bosch 040 fuel pump fit in the standard basket of a coupe without having to do the mods as the 044 pump requires? Thanks Chris
          Both the Bosch Motorsport 040 and 044 are 60 mm diameter fuel pumps so the mods needed to install the 044 are the same as needed for the 040. Might as well go for the 044.
          RS2'd 93 UrS4 5 spd sedan
          94 UrS4 V8 6 spd manual avant

          Comment

          • Jamo
            Retired OG Mod
            • Mar 2004
            • 21750
            • Country: United Kingdom

            #6
            Originally posted by UrS4boy
            Both the Bosch Motorsport 040 and 044 are 60 mm diameter fuel pumps so the mods needed to install the 044 are the same as needed for the 040. Might as well go for the 044.
            the locating ring on the 040 is lower down meaning it can be put in the holder from the bottom so you only have to mod the breather at the top. Less work than an 044

            The 040 though isn't the best pump in the world though better off with the 044 or DW300

            Comment

            • Chris P
              S2Forum Enthusiast
              • Dec 2004
              • 145

              #7
              Thanks for the answers all. Looks like i might aswell go for the 044.

              Comment

              Working...