Audi A8 D2 ABZ ECU Pinout

[shone190]

Hi guys,

is it possible that I can't find ABZ or AHC ECU Pinout on the internet?!?!?

I only found this http://www.castor-troy.com/v8/ABZ%204.2V8%20Wiring.pdf

and it is totally unusable

[nicka90q]

I hope this can help but it is on German language .
http://www.volkspage.net/technik/ssp/ssp/SSP_161.PDF

[Kieron20V]

Why is that totally unusable? I used it for mine.

Ecu plugs are A-E and pins are numbered as per the diagram.
Eg injector 5 triggered by ground from Ecu on plug E pin 5.

Sent from my HTC One X+ using Tapatalk

[shone190]

Because I need to print all papers, than cut them and connect to make one page scheme. Scheme for one ECU on 7 pages, that's real BS.

Where you can see ECU power pinouts?!?!

Just look at any USA cars wiring diagram, that's made for kids to understood...

[Val]

We could make a group-buy and send you some paper?

[shone190]

Good idea...

[Kieron20V]

Because I need to print all papers, than cut them and connect to make one page scheme. Scheme for one ECU on 7 pages, that's real BS.

Where you can see ECU power pinouts?!?!

Just look at any USA cars wiring diagram, that's made for kids to understood...

Are you splicing the loom to a standalone Ecu?

All the pins you need are in the diagram, took me an hour max with a pen and paper.



Sent from my HTC One X+ using Tapatalk

[UrS4boy]

Hi guys, is it possible that I can't find ABZ or AHC ECU Pinout on the internet?!?!?(

These are for the UrS4/S6 V8 so they might work for you

[shone190]

URS4boy is always there for us

In the meantime I cut all seven papers and made one big "map", just like URS4boy posted on first picture. I'll take a picture and post it here for someone future projects

[UrS4boy]

URS4boy is always there for us

Here is a clearer version, auf Deutsche

[shone190]

Why is that totally unusable? I used it for mine.

Ecu plugs are A-E and pins are numbered as per the diagram.
Eg injector 5 triggered by ground from Ecu on plug E pin 5.

Sent from my HTC One X+ using Tapatalk

So, you said that E pins are numbered as on the diagram?

First page shows E25. There are 24 pins per connector, so E25 couldn't be pin number.