Audi S2 Vems Tuning Problem!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • audigtrs2
    S2Forum Fanatic
    • Nov 2013
    • 56
    • Country: Germany

    #16
    Iam now using 3.5 bar with one pump and with two together 4 bar.

    Comment

    • Billman
      S2Forum Freak
      • Nov 2004
      • 4129

      #17
      the ignition fluctuates a tidle to hold the rpm steady with the ISV valve. Look for Lambda at idle with EGO correction 100%. use 3.1 or 2.8 imjector ms nad scale the whole VE table to get lambda value same with lambda target with ego correction 100%.
      Go Holset or Go RS4

      Comment

      • audigtrs2
        S2Forum Fanatic
        • Nov 2013
        • 56
        • Country: Germany

        #18
        Ok id do it eventuelly on monday, ive sent the log.

        Comment

        • audigtrs2
          S2Forum Fanatic
          • Nov 2013
          • 56
          • Country: Germany

          #19
          Soo Vasilis i do my standing runs today and these are the results, video log.

          I do these tests withe all 3 configs, and the best one in my opinion ist the first (config2)


          Launch Control Active



          Launch Control Active 2



          Redline



          I sent the log via email

          Comment

          Working...