Next Power Step?

[Jolfa]

Yeah I'd sooner get it live mapped, but I don't think there's much in the way of rolling roads in deepest darkest nowhere

Is it a case of sending my ECU off otherwise or what? I'll send some PMs, cheers gents

[rynaqui]

There's lots of options on here:

Will @ VRS
S2 Central (Paul Nugent)
prj (Dmitri)

Sure others might be able to recommend others but can't go wrong with any of the above

[UrS4boy]

Next question - mapping, do I send my ECU to someone? Is a map something I can import onto an ECU myself? Any places in the Southwest come recommended? Cheaper the better, but I guess you gets what you pays for so a happy medium!

If your ECU hasn't already been socketed for the boost and timing chips and the stock 2.5 Bar MAP sensor has been replaced with the needed 3.0 Bar MAP sensor, it is possible to purchase only the chips and, with some skill and care, install a purchased chip set in your ECU. However, if your ECU is all stock (no sockets and still with the 2.5 Bar MAP sensor), you will be better to send it via courier (with insurance) to someone capable and knowledgible to make the changes. MRC should be able to do this. Paul Nugent should be able to do this. PRJ (Dmitri) should be able to do this.

Good luck.