rs2 set up

[Majorcina]

Hello,i am thinking to make rs2 set up on my urs4 2.2t
What do i need?(car is complet stock exept r8 coils)
rs2 injectors
rs2 manufold
rs2 turbo k24 7200
remap

Do i need smth more?
How much aprox this would cost me?Thank's

[nip]

That's it

[UrS4boy]

Hello,i am thinking to make rs2 set up on my urs4 2.2t
What do i need?(car is complet stock exept r8 coils) rs2 injectors rs2 manufold rs2 turbo k24 7200 remap Do i need smth more? How much aprox this would cost me? Thank's

If you want to go further and stay OE RS2, there is also the RS2 MAF and the RS2 exhaust cam that you can add.

There is no fixed cost because there is no one place to buy everything and new parts are hard to find. Quick answer might be at least 2000 Euros for good parts.

[Majorcina]

Do i need to make the engine "stronger" with this set up or can stay stock inside?

[nip]

Do i need to make the engine "stronger" with this set up or can stay stock inside?

Stock

[Majorcina]

Thanks nip

[nip]

[shone190]

Stock

Stock for stock RS2 setup, but I doubt that it will be stock RS2 map in ECU

[UrS4boy]

Stock for stock RS2 setup, but I doubt that it will be stock RS2 map in ECU

With proper software you can get 360 to 380 hp safely out of stock AAN (and I presume ABY) internals and RS2 hardware (MAP sensor, MAF, injectors, turbo, exhaust manifold).

At least in my experience over here in NAmerica.

[Rusty]

Intercooler & fuel pump are required too.

Make sure you have the metal headgasket and that the compression is good. Also need to make sure that coils, wiring and plugs are all good and that there are absolutely no boost leaks, as at nearly 2 bar gauge mid-range, you'll soon find out what's weak in the system!

I run an RS2 spec ABY and have around 360bhp on a generic map, with about the same torque. It's plenty quick enough for the road but you'll always want more on track...

[Majorcina]

My plan is smth more then the rs2 set up(i hope)
plan is to get upgrated rods,440injectors,044fuel pump and thinking to go holset ex35 turbo?MY aim is to be close to 500hp or maybe litle more,but prj is on vacation so i w8 him to come back

[Rusty]

That's a little different to your original post then

Should be fun when it's done...

[driftin jo]

My plan is smth more then the rs2 set up(i hope)
plan is to get upgrated rods,440injectors,044fuel pump and thinking to go holset ex35 turbo?MY aim is to be close to 500hp or maybe litle more,but prj is on vacation so i w8 him to come back

Don't get 440cc injectors if you want that much power, they are too small, just get some ~650-750 EV14's and be done with it, then you have some head room.

[Majorcina]

Yes i didnt update it,but my only problem is remap,thats why i need to w8 to prj...

[Majorcina]

What u think abouth holset hx35 turbo guys?