You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
after checking numerous things to figure out why my 200 was not hitting full boost , i thought to check the turbo blades to see if there was any damage, so off with the maf to turbo hose , and inside is a metal sleeve? never seen that before, anyway it is sitting half across the turbo inlet having slipped blocking the air intake , so after some manipulation it is correctly placed in the middle of the hose , and the old thing is flying again, where to get a new one in silicone ?
check the basics
... so off with the maf to turbo hose , and inside is a metal sleeve? never seen that before,
Sounds like an 034 product. There were issues with the MAF to turbo aftermarket hoses collapsing that were solved by inserting a section of metal pipe in the hose. Could be an okay solution if nothing slips out of place (as you have discovered).
RS2'd 93 UrS4 5 spd sedan
94 UrS4 V8 6 spd manual avant
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment