workshop manual

[Jeffer]

Hi guys,

I'm overhauling my 3b engine (hope thats the right term ) Can anybody help me with a workshop manual on this engine?
With (dis)assembly coverage and exploded views with partnumbers and discriptions.

Hope anyone can help me,

cheers,
Jeffer

[Martynf]

Jeffer the only chance would be the Bently's US manual for the AAN Audi 100 / S4 there isn't anything really readily available. The Bently manual you get form the US.

Martyn

[Tylerb929]

He'd probably want the Bentley manual for the 91' 200 quattro because that has the 3B in it, the 100/S4 book would cover the AAN.

[Jeffer]

I now got the 200 book from haynes, but that does not include the 3B version. So I probably need the later ones? But at the other hand the AAN has the correct torques for the bolts in the short-block. Ignition is not really an issue.

Maybe you got an isbn number on that Bently manual!

THX

[Martynf]

Here you go Jeffer:

Audi
100, A6: 1992-1997
(Including the S4, S6, quattro and wagon)
Official Factory Repair Manual

by Audi of America
Softcover, 8-3/8 in. by 11 in.
Three volume set totaling 3,854 pages
3,236 illustrations and diagrams
1,228 electrical wiring diagrams
Audi Part No. LPV 800 702
Bentley Stock Number: A697
ISBN: 0-8376-0374-9
Price : $264.95

and the web site is:

http://www.bentleypublishers.com/product.htm?code=A697&subject=2

Martyn

[audiman]

Or try erwin!! I bought repair manual for 200 turbo 3b engine cost me 18 euros. Thats not bad for a genuine booklet. Covers complete engine mechanicals all info, tightening torques, and dimensions etc.

[Dutch_RsBlueS2]

I have got a original Dutch 200 TQ engine learning manual for mechanics from audi its got some usefull knowledge in it like engine fault codes and electrics. Maybe i can copy it ? Send me a mail if you`re interessted, its in Dutch.

this is the same engine as used in the ealier s2`s so with the engine code 3B.

[Josh-stateside]

Bently has the 3b motor for the 200 20v 3b application

I personally have a Coupe quattro 20v 7a block book, and a S4-s6( and v6 motor too) cd. I believe the S4 book is actually 3! books and can be quite expensive.

Cheers
Josh

Btw it's impossible to copy the cd.

[MikQuattro]

Btw it's impossible to copy the cd.

Nothing's impossible mate...

[S2central.net]

Guys - this stuff is all available on ERWIN for very reasonable money - usually 18 Euros per document. The schematics are much more expensive but mechanical & Motronic info can be found for everything from WR thru RR, 3B, AAN, ABY, ADU if you look - and most of it is in English and German.

Also docs on A/C, bodywork, gearbox, running gear and such is also on Erwin if you look hard enough.

Cheers,

Paul

[Jeffer]

Help me out here Paul........ What is erwin? It sounds interesting

[S2central.net]

Follow the link from S2 Central workshop info pages...

[Sweeper]

I have a Audi 100 Bentley CD that covers AAN. It's quite possible to copy it but i don't know what to do about serial number. It's generated every time depending on PC configuration. And if you ever install it on new PC you need to send an e-mail to their support to get new activation code.

Quite troublesome.

Anyway let me know if you need it.

[Jeffer]

cd

Yo Sweeper,

You would very much help me with sending me a copy with reg. nr.
Are al the torques coverd aswell?
Let me know if you need anything from me for it.

Thanks man,

Jeffer

[Sweeper]

Jeffer: I've decieded not to do the copy but just send you the original disk. It's just becouse my PC have a crappy internet connection right now so it will take ages for you to download a copy from it. Easer just to send you the disk.

PM me with the delivery adress I will send you it by post.

P.S. I don't need anything for it. It's s2 community after all.