Ur AAN swap. Which Brackets?

[BosnianS2]

I have been owning a UrQuattro for few years now but due to my move to Germany, never got around to get the car running. I bought it almost complete, everything was there except engine.

Then i found a Urs4 that tree fell down on and bought is as donor. Now I am going to US to visit my family and i thought i would work on UR little bit finnaly. Plan is to get it runnung with AAN engine and then ship it over to Germany where I live now.

I dont plan on having it done this time around I am in US but i want to start.

Now after little bit background, i need som help. Which engine brackets do i use to fit the AAN in Ur quattro?

Unfortunately previous owner threw the old engine away as it was very bad damaged so i dont have the Ur brackets.

Here are two pics that I have from both cars at this time, I will make some more when I am there next month.

Thanks for help in advance

[_ShurikeN]

Typ85 motor mount brackets are different from Typ89 & B4, but it is very likely than any R5 audi 80/90/Coupe/S2 motor mount brackets will fit. They should cost nothing from NG FWD cars on scrapeyards.

[caterpillar]

ive tryed the old enginebrackets... they will fit... ive eve tryed vw passat( santana) engine brackets on 2,5tdi engines.(year 98). they DO fit...

[caterpillar]

mostly ALL the part will fit.... the s2 front end/ from v6 verson/ from 20v.... the BIG diff are the rubber in engine/ front subframe.... from 91-92 its 12mm bolts to the chassi...

[JTK]

I have used my old kv 10v engine brackets when. I use same aan engine.

[BosnianS2]

I have used my old kv 10v engine brackets when. I use same aan engine.

I knew that old 10v brackets would fit, but problem is that i dont have them, as stated in my first posto.

Thanks for input, I guess I will try to source some coupe typ 89 brackets when I am over there, as I understood that they will fit

[quattro-nick]

i used the brackets from the old kv 2.2 engine on my AAN engine in a b2 coupe quattro