K24 7200 turbo RS2 turbo compressor housing dimension

**veneto rs2** · 21 August 2014, 13:07

Had it nearby so here you go...

**bartolomeus** · 21 August 2014, 13:19

Thanks mate, can you measure also the thickness? Like in my first picture?

**veneto rs2** · 21 August 2014, 14:14

Originally posted by bartolomeus

Thanks mate, can you measure also the thickness? Like in my first picture?

Doh!

Did'nt see see the first picture...
Tomorrow morning will be good for you?
I'm far from it right now...

**bartolomeus** · 21 August 2014, 14:43

There is no problem mate... I am not in a hurry

Thanks.

**Tonks4x4** · 21 August 2014, 17:16

Measuring the housing across the two places you show.

45mm wide
145mm diameter

**bartolomeus** · 21 August 2014, 18:27

Thanks Tony, but why is veneto rs2's one is only 120'ish in diameter in his picutre? Am I blind/missing something?

**Tonks4x4** · 21 August 2014, 18:50

K24 7200 turbo RS2 turbo compressor housing dimension

Edit

**Ruffiano** · 21 August 2014, 19:36

Originally posted by Tonks4x4

Not a clue but this is certainly a K24-7200

...not the compressor

**Tonks4x4** · 21 August 2014, 19:37

Originally posted by Ruffiano

...not the compressor

Yes you are right sorry chaps...
Compressor housing is larger on this turbo

**Ruffiano** · 21 August 2014, 19:45

i was talking specifically about the compressor wheel, which is the IMS one, but the housing should be the original.

**veneto rs2** · 22 August 2014, 07:14

Hope it's good enough.

**bartolomeus** · 22 August 2014, 10:44

Thanks mate!

Comment