Which rocker cover with TFSI coils?

[geneandbolly]

here's a couple of nice covers ..

http://www.ebay.co.uk/itm/Zundspulen...item1e9a2b0bd5

http://www.ebay.co.uk/itm/Zundspulen...item1e999b8cf7

[UrS4boy]

Anybody that know what TFSI coils that will fit with this cover or the one from facebook?

Probably these ones

[S2central.net]

You can't ignore the heat, but I fully agree the visual attributes of that cover with COPs sitting at right height looks really sweet.

[Jonas_R]

I'm not t that worried about heat to be honest.

More worried about the right coil height

[S2central.net]

I can visualise plenty of heat radiating off those coil tops shown in the pic that Jonas re-posted.

[quattro-nick]

that is a nice cover but almost no cooling for the coils

[Jonas_R]

Anybody that know what TFSI coils that will fit with this cover or the one from facebook?

I mean the different version of TFSI coils have different end height, so I guess you need the correct ones?

[Rusty]

Yes, take the lower lip and reprofile the cam cover.

Calm down Dave, no need to shout

[UrS4boy]

. This will improve air flow

Not relative to NO cover.

[Christophski]

You planning on removing the lower lip of the cover then Andy?

[Rusty]

Here's a mock up with 20mm spacers. I will look at removing material from the coil cover and cleaning it and the rocker cover up and giving them a lick of paint. This will improve air flow and I think it looks perfectly acceptable.

[Rusty]

Here's a mock up with 20mm spacers. I will look at removing material from the coil cover and cleaning it and the rocker cover up and giving them a lick of paint. This will improve air flow and I think it looks perfectly acceptable.

[Rusty]

What I heard there is that you want to adapt the covers to work and let air out lol... and also that you need to find a more suitabler job to accomodate this again

Working as a CAD monkey for a contractor is a bit different to working in a place that machines metal as part of their business

I want to improve the covers aesthetically and also remove dead weight and restrictions to airflow, as well as improving cable routing and maybe even sort the breather out too...

Not much then.

[quattro-nick]

if anyone is interested in my modified coil cover (post3),let me know!

[Christophski]

Shame I don't work somewhere with a mill anymore as I've an idea to modify the OE covers while maintaining their appearance.

What I heard there is that you want to adapt the covers to work and let air out lol... and also that you need to find a more suitabler job to accomodate this again