Fuel injectors Ev14 -850cc with precision 5858

[s0_big]

Hello! I'm about to buy me some injectors for my AAN with precision 5858 turbo, maxxecu, tubular manifold, stock inlet and 3,5" Dp. This will run together with stock fuel lines and fuelrail. 044-pump will feed the lady with fuel (Gasoline 98oct). I was thinking about these injectors: http://www.finjector.com/verkkokaupp...-p-487498-187/

What is your thoughts about the size? to small/to big? and injector "family" EV14 good injectors?

[V6quattro]

Engine looks very nice! I would go for the 1200cc ev14 injector. Thy still have perfect idle and its also good if you want to go E85.

I have the ev14 1200cc@4bar max out on e85 @700hp

[caterpillar]

850 cc are too small...max 80% duty max.... have some bigger... 1000ccm at least..and 2 pumps..
leaned out engine= you needs a bicyckle...and a towtruck

[s0_big]

Okey..

Precision specs this turbo to about 600hp, shouldn't a single bosch 044 take that? I don't think i will make 600hp on this engine setup. Looking at around 500-550hp on the crank.

[caterpillar]

tune the engine in 4-6 small steps are very expencxive.... build the engine for 900+.. and decide to use less pressure, and fuel, for the HP.. the owner decide the power or??

[popdemonic]

TJ:any differences between the old fashion Deka EV1 injectors VS Modern Bosch EV14 injectors?
I'm planning to get the new injectors soon since my 440CC bosch is maxed out on E85.
the price wises between above injectors are coming on my mind.the new EV14 is 2X price though.

[s0_big]

tune the engine in 4-6 small steps are very expencxive.... build the engine for 900+.. and decide to use less pressure, and fuel, for the HP.. the owner decide the power or??

Does it bother you that i don't want 900+ hp? The engine is built to take a lot more power than 5-600hp i know, but since it is a streetcar i don't want to go to that level and honestly i don't have the need for that amount of power at the moment. Im going with a single bosch 044 pump and 1000cc ev14 injectors. I am the engine builder/owner.