Urgent. RS2 Turbo to MAF hose

[karlblues2]

Hi guys
Am trying to fit all my new parts at the moment and I can't get the stock ABY turbo to MAF hose to fit
I believe the ABY is 60mm and the RS2 is 70mm. Am I missing something or do I need an RS2 hose to make it fit
Cheers
Karl
Oz

[RIX]

when i fitted my rs2 turbo,it went on like a glove.but if your´s is a modded rs2 turbo then????,why not just throw it away and move the maf to the pressure side,thats my plan,when i have the cash.
Regards
RIX

[karlblues2]

when i fitted my rs2 turbo,it went on like a glove.but if your´s is a modded rs2 turbo then????,why not just throw it away and move the maf to the pressure side,thats my plan,when i have the cash.
Regards
RIX

Hmmm, would that be more or less work and time than getting hold of a new hose Who on here has done that move to the pressure side. Does it require a remap?
Cheers
Karl

[Doug_RS2]

Should be a straight swap from s2 to rs2.

It does require a remap after moving the maf.

[karlblues2]

Should be a straight swap from s2 to rs2.

It does require a remap after moving the maf.

Thanks Doug. I guess I won't do that just yet then!
The MD147 is a stage 3 RS2 Turbo. It appears to have a 70mm outlet as opposed to the 60mm of the S2 / RS2 turbo.
Does that make sense?
Does that require a custom hose? If so, does anyone know where to get one from? It's the same stup as ApNess
Cheers
Karl
Oz

[Doug_RS2]

ah - ok - if you want to keep the maf hose - then you need a 60 - 70 adapter hose and a short section of 60mm metal tube - and you can make a short adapter for it - 60-70mm is the same size as the IC mod hose as well - HTH

[karlblues2]

ah - ok - if you want to keep the maf hose - then you need a 60 - 70 adapter hose and a short section of 60mm metal tube - and you can make a short adapter for it - 60-70mm is the same size as the IC mod hose as well - HTH

Thanks Mate
I think I'll do that
Cheers
Karl
Oz

[S2 Ant]

Greg has that turbo too i think, so he may be able to help before you start buying other bits to fit

[karlblues2]

Greg has that turbo too i think, so he may be able to help before you start buying other bits to fit

Cheers for that....Greg r u out there
Karl
Oz

[Doug_RS2]

he has done the same - IIRC

[karlblues2]

he has done the same - IIRC

Thanks Guys
Sorted as recommended. Fitted a 70mm - 60mm reducer and a silcone straight.
Cheers
Karl
Oz