-
-
I saw these the other day and wondered if they'd be worth taking a punt on, then I thought, are rods the sort of thing you want to be gambleing on quality??sigpic
1991 Audi S2 3B - 2.5 Stroker engine
1997 A6 2.5TDi quattro avant - C4
1976 RD250E / 350LC cafe racer -
They are demagnetized- great! Enemy submarines and magnetically controlled torpedoes won't recognise you
Comment
-
That might be useful, my coupe wants to be a submarinePanthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 AvantComment
-
same type but not the same name as the sets Ive used a few times, one was a stroker with over 540lbs torque with its neck rung every time out 10yr ago and still going strong.
none have failed up to now thats my experience with themComment
-
That's the trouble with a lot of Chinese stuff. It might look the same but it's made of cheap as **** monkey metalPanthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 AvantComment
-
Mate bought such rods (from reputable reseller from norway) and the main bearing bore is out-of-round by such an amount that it eats the bearing top coating.
Wise advise: get them measured up while torqued up before fitting.Comment
-
VMI rods use non genuine ARP rod bolts, 2 engine failures over on club gti rod bolts sheering with catastrophic damage.
The ebay rods with genuine ARP hardware seam to be up to the job though.Comment
-
-
I believe the rods were manufactured in Australia not from China.i never used those but i personally know the store's owner.he always stands behind his products.His name is Sven Richter.one of a few I5 from Asia.Comment
-
You get what you pay for.Panthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 AvantComment
-
Well had some expensive rods and the weight of them. Ware last crap.. Honestly what do you think people pay for Produktion of rods in China?Comment
Comment