Recalibrating the stock MAP sensor?

[K Simmonds]

As per title anyone know the score with what's involved with recalibrating the stock MAP sensor?

I've got a couple of spare knocking about and am curious to know.

[K Simmonds]

No one got any pointers?

I'd like to get one of my old 200KPA units converted, there's one inside my RS2+ 3B ECU so someone must be able to do it.

[UrS4boy]

No one got any pointers?

Why bother futzing with old technology when, for US$80, you can have a new technology 3 Bar MAP sensor?

EFI Express: http://www.efiexpress.com/catalog/pr...products_id=82

[AndyP]

£10 delivered

http://www.ebay.co.uk/itm/1716419520...%3AMEBIDX%3AIT

[prj]

Or you can have exactly the same thing for US $11 if you know how to solder.

[UrS4boy]

£10 delivered

Sure. But that is the only the raw Freescale pressure transducer. Did you see that EFI Express's version is already mounted on a bespoke plug and play printed circuit board?

[UrS4boy]

Or you can have exactly the same thing for US $11 if you know how to solder.

And can follow instructions provided by very knowledgible people who sometimes share their knowledge openly for the benefit of forum members.

(Not me in this case)