FPR for RS2

[Rikki Kitto]

Which FPR to use with my RS2 set up, I'm getting a Bosch 044 pump to fit asap

[A80Avant]

It depends. If you aim to use an rs2 motronic best use a 3.8bar. If you are going to use any aftermarket or map the car then the 4bar from aby will also do

[Rikki Kitto]

So would my ABY S2 have a 4 bar FPR as standard

[Error404]

yup

[Quattronaut]

Ask your mapper.
And if you use a generic map, you have to take the one the map is written for.

[Rikki Kitto]

Sweet one less thing to change