HELP PLEASE!!!! Audi S2 Wastegate, Turbo and N75

[Apow]

Hi all,

I need some advice please!!!

I have a project car Golf mk3 2.0ltr ABF 16v Turbo. Running DTA S40 PRO managment

What i would like to know is what goes where...

Do i need a N75 valve?????
N75 - F version.
T piece connection
Long horizontal connection
Short horizontal connection
and connection point down.

Audi S2 Turbo
Where does the connection on the compressor housing go to? (this is the tiny pipe that stick out to where the air filter connects)

Audi S2 Wastegate (With adjustable hex nut on top, also the is vented to atmosphere)
Top connector of wastegate
Bottom Banjo connector on wastegate

Any help or diagrams would be appreciated on how all these should be connected together

Many thanks all.

[UrS4boy]

Sorry. It is difficult to understand what you know and don't know about the basic Audi 20V turbo system from your questions. Here are some links and diagrams that might (or might not) help you:

N75 info: http://forums.quattroworld.com/s4s6/msgs/20987.phtml

By-pass Valve info: http://forums.quattroworld.com/s4s6/msgs/20994.phtml

[Apow]

Thank you very much. This is very helpful i will check it against my current setup tomorrow!