Another dump valve question

[drunkenalan20v]

i have an ABY engine that has had a certain amount of mods done to it, but i dont have all the pipe work from the turbo through to the long metal pipe that connect to the throttle body (i know dead technical)

what i want to do is fit a bailey dump valve, the question is can i plumb the air mass sensor after the turbo instead of before or will this just **** things up , or if i leave as audi wanted it will the dump valve cause some flames out of the exhaust?

[WabTheKing]

if you move the maf, you need a re map, and a dump valve wont create flames out of the exhaust, you need a straight through zaust system for that

[drunkenalan20v]

i thought that a atmospheric dump valve caused over fuelling leading to flames.
or is that in my head?

[WabTheKing]

mine didnt flame untill i had a straight though zaust

[drunkenalan20v]

my exhaust wont be far off straight through its going to be a replica rally car, so it needs to make the right noises

[WabTheKing]

why replica?

get your national B licence and do it for real!!!

i do work on this one

link

[kwlw]

OFFTOPIC:

4 bolt pattern compomotives MO (?) ~ are my favourite. How much do they cost, and do you ordered them like custom bolt pattern (as far I understand they can drill the holes whatever you want) or you just used ones from peugeot ?

Sau

[drunkenalan20v]

we will have to see how it goes 1st of all, where did you get the sport bonnet from on your UR?

[WabTheKing]

they were off a saxo kit car i think, alot of rally cars use 4x108 stud pattern, if your not to bothered about condition ie you can refurb them you can pic em up for bout 30 quid a rim - new are bout £120 from demon tweeks etc. magnessium ones are silly money but BIG differance in weight

i like em, but i already had 18" lenso RS4's otherwise id have some!!!

regards
will

[WabTheKing]

we will have to see how it goes 1st of all, where did you get the sport bonnet from on your UR?

neither actually my car i just work on them,

the white one came with that bonnet, its a fibre glass copy

regards
will

[drunkenalan20v]

ive been looking for one but cant find one anywhere.

[kwlw]

they were off a saxo kit car i think, alot of rally cars use 4x108 stud pattern, if your not to bothered about condition ie you can refurb them you can pic em up for bout 30 quid a rim - new are bout £120 from demon tweeks etc. magnessium ones are silly money but BIG differance in weight
will

Thank's for info. I was not sure if these PSA bolt pattern wheels, which time to time come on sale used (could not afford new) fit. Now it seems that they do fit .

Sau

[WabTheKing]

ive been looking for one but cant find one anywhere.

i did find a site that did these once will try and find it again,

who did your engine conversion?

will

[drunkenalan20v]

me and the father in law