Genuine bosch injectors

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • andy j
    S2Forum Addict
    • Oct 2014
    • 228
    • Country: Scotland

    #1

    Genuine bosch injectors

    I am looking to buy bosch 440 injectors. My worry is there is that many fakes out there i don't want to end up with non genuine ones!
    Can anyone point me in the direction of a reliable place to buy genuine bosch injectors?
  • Jubu
    S2Forum Hobbyist
    • Jun 2015
    • 12
    • Country: Germany

    #2
    I think you are referring to the neon green ones 0 280 150 558 - don´t look for these! Bosch doesn´t manufacture it anymore. Nearly all available on market are fake.
    Buy :

    0 280 155 968
    440ccm/3bar
    12-15 ohm

    they have the same charecteristcs and size. fit perfectly for I5. Right now there are no fakes of these on market WITH Bosch number and sign.

    I bought from this seller a few times:
    http://www.ebay.de/itm/5-Stuck-EINSP...item19faa35313
    Last edited by Jubu; 11 June 2015, 09:37.

    Comment

    • andy j
      S2Forum Addict
      • Oct 2014
      • 228
      • Country: Scotland

      #3
      thanks for that!

      Comment

      • macspring
        S2Forum Zealot
        • Mar 2005
        • 6371
        • Home: Ireland Current: Wallis & Futuna

        #4
        Can I just chip in and ask what sort of turbo size / bhp (approximately) do these particualr injectors 'match' to ?

        Would the suit a billet RS2 turbo that has a matching chip easily, or would they be at the upper end of their duty cycle, and the next size up might be the better bet, not for extra power in the future, but for longevity / reliability ?

        Thanks.

        Comment

        • andy j
          S2Forum Addict
          • Oct 2014
          • 228
          • Country: Scotland

          #5
          Originally posted by macspring
          Can I just chip in and ask what sort of turbo size / bhp (approximately) do these particualr injectors 'match' to ?

          Would the suit a billet RS2 turbo that has a matching chip easily, or would they be at the upper end of their duty cycle, and the next size up might be the better bet, not for extra power in the future, but for longevity / reliability ?

          Thanks.
          I bought one of alberts K26 turbos and i have a wagner exhaust manifold, RS2 downpipe and an RS2 intercooler.
          Not sure on a power figure to be honest!

          Comment

          • AndyP
            S2Forum Zealot
            • Feb 2004
            • 6049
            • Country: England

            #6


            sigpic
            1991 Audi S2 3B - 2.5 Stroker engine
            1997 A6 2.5TDi quattro avant - C4
            1976 RD250E / 350LC cafe racer

            Comment

            • andy j
              S2Forum Addict
              • Oct 2014
              • 228
              • Country: Scotland

              #7
              If you are getting a car custom re mapped instead of a generic chip. Does it matter if the injector is EV1 or EV6?

              Comment

              • AndyP
                S2Forum Zealot
                • Feb 2004
                • 6049
                • Country: England

                #8
                Didn't make any difference on mine. If anything it runs smoother on the new ones.
                sigpic
                1991 Audi S2 3B - 2.5 Stroker engine
                1997 A6 2.5TDi quattro avant - C4
                1976 RD250E / 350LC cafe racer

                Comment

                • Jubu
                  S2Forum Hobbyist
                  • Jun 2015
                  • 12
                  • Country: Germany

                  #9
                  Those injectors will also work with chipsets mapped for RS2 injectors. In this case you would have to install 3bar fuel pressure regulator... but to be on a safe side you should check AFR.

                  Comment

                  • andy j
                    S2Forum Addict
                    • Oct 2014
                    • 228
                    • Country: Scotland

                    #10
                    Thanks for that guys.

                    Comment

                    Working...